REACH Compliance: Stainless Steel Jewelry Guide | IVANDA
Selling stainless steel jewelry in the EU means meeting REACH rules on nickel release and restricted substances. This guide explains what to ask your supplier for.

Short answer: If you sell stainless steel jewelry in the European Union, REACH is the regulation that decides whether your products can legally be placed on the market. It restricts substances of concern — for jewelry, the most important is nickel release from pieces in prolonged contact with the skin — and it places the responsibility on the business that puts the product on the EU market. As a wholesale buyer, you do not need to become a chemicals lawyer, but you do need three things from your supplier before you order: a statement of which REACH requirements apply to your SKUs, test reports for the specific SKUs and finishes you are buying, and a commitment that bulk production uses the same material and coating as the tested samples. Get those three in writing at the quotation stage, and most REACH risk disappears before it reaches your warehouse.
Why REACH Is a Buying Question, Not Just a Legal One
REACH is Regulation (EC) No 1907/2006, the EU's framework for the registration, evaluation, authorisation and restriction of chemicals. It applies to products sold in the EU, including jewelry, and it works differently from a quality standard you can choose to follow. A quality standard is a promise about how good a product is; REACH is a legal condition for market access. A shipment that does not meet it can be stopped at the border, withdrawn from sale, or recalled — and the cost of that outcome falls on the importer and the brand, not on the factory that made the pieces.
For stainless steel jewelry, the practical centre of REACH is nickel. Nickel is present in 316L stainless steel — the grade contains nickel 10–14%, chromium 16–18%, molybdenum 2–3%, and carbon at a maximum of 0.03% — and nickel release from items in prolonged skin contact is restricted under Annex XVII of REACH. That does not mean 316L jewelry is banned in the EU; it is widely sold there. It means the rate at which nickel is released from the finished piece must stay within the applicable limit, and that the supplier should be able to show test evidence for the pieces you are buying. The distinction matters: compliance is a property of the finished product, not of the raw steel grade alone. The PVD coating, the finishing, and the design all play a part, which is why a certificate for the steel does not by itself prove that a finished earring complies.
This is also a commercial point. EU retailers and marketplaces increasingly ask their suppliers for compliance documentation before they list a product. A buyer who can produce a REACH statement and a nickel release test report wins shelf space from buyers who cannot. A buyer who cannot produce them may not even get to the price negotiation. REACH compliance, handled early, is therefore not only a legal shield — it is a selling point in the wholesale conversation.
What REACH Actually Requires for Jewelry
REACH works through several mechanisms, and a buyer only needs to understand the ones that touch jewelry. The first is the restriction list in Annex XVII, which sets conditions on substances in products. Entry 27 of Annex XVII covers nickel and its compounds in articles intended to come into direct and prolonged contact with the skin — exactly what earrings, necklaces, bracelets, and rings do. The restriction limits nickel release from those articles, and compliance is demonstrated by testing the finished article.
The second mechanism is the Candidate List of Substances of Very High Concern. If a substance on that list is present in an article above a threshold, the supplier has a duty to communicate that information down the supply chain. For a jewelry buyer, the practical step is to ask the supplier to confirm, in writing, whether any Candidate List substance is present in the products you are buying above the relevant threshold. A supplier that can answer that question clearly has done the homework; one that cannot should be asked to check before you order.
The third mechanism is enforcement at national level. EU member states enforce REACH through market surveillance, and the requirements are the same across the EU even though the enforcing authority differs by country. That means a product compliant for Germany is compliant for France on the REACH question, but the documentation still has to be available in a form your customer — a retailer, a marketplace, or an authority — can read. Keep your compliance documents filed by SKU, and keep them with the order records, not in a chat thread that disappears.
One more point: REACH is not a certificate you buy once. It is an ongoing obligation that follows the product, the material, and the production process. A change of steel supplier, a change of PVD colour, or a change of plating process can change the result, so a report from last year does not automatically cover this year's production. Ask for current evidence for the SKUs you are ordering now.
How to Get Compliance Evidence from Your Supplier
Start at the quotation stage, while you still have leverage. Ask for three documents, and ask for them for the exact SKUs and finishes on your order.
What to request, and in what form
First, a REACH compliance statement for the products you are buying: a written statement identifying the products, confirming the applicable REACH requirements, and naming the test evidence behind the statement. Second, the nickel release test report for the finished pieces — tested to the recognised method for nickel release, EN 1811, on the finished article in the finish you are ordering. Confirm the report states the laboratory, the method, the samples tested, and the result; a statement without a report behind it is a claim, and a report for a different finish is evidence for a different product. Third, confirmation that the bulk order will use the same material grade and coating process as the tested samples. That last point is the one buyers forget, and it is the one that matters most: compliance evidence is only useful if the product that ships is the product that was tested.
How to check what you receive
Read the report rather than filing it. Check that the product description on the report matches your SKU and that the finish — 18K PVD gold, rose gold, or silver tone — matches what you ordered. Check the date: a recent report for the current production setup is worth more than an older report from a different setup. Check that the test method is named and that the result is stated clearly rather than summarised as a single word. And keep a copy for your own customers, because a retailer who asks you for compliance evidence will expect the same documents you asked your factory for. For the wider documentation picture, see the stainless steel jewelry certifications guide, and for how to verify a shipment against its paperwork, the quality control guide.
IVANDA test evidence on file: one example
As an example of what to ask for, IVANDA report RTS25M25797SL (RTS Test, 29 May 2025), tested on silvery metal accessory components (rhinestone holder, bead, and rod), passed total lead (not detected, limit 500 mg/kg) and total cadmium (not detected, limit 100 mg/kg). That report contains no nickel release test. This report applies only to the samples tested — ask for the report for the exact SKU and finish on your order.
The Risks of Getting It Wrong
The risks fall into three groups. The first is legal and logistical: a non-compliant shipment can be detained, refused entry, or recalled, and the cost of a recall lands on the brand and the importer. The second is commercial: a retailer that discovers a compliance gap after listing your product may delist the whole range, not just the affected SKU, and the trust that took months to build is hard to rebuild. The third is reputational: in the EU market, compliance documentation is increasingly part of the buying decision, and brands that treat it as an afterthought lose orders to brands that treat it as standard practice.
There are also traps that look like shortcuts. A material certificate for the steel is not proof that the finished piece complies, because the finished piece includes the coating and the assembly. A test report for a different design or a different PVD colour is not proof for your SKU. And a supplier's general statement that "all our products are REACH compliant" is not evidence for any specific product — it is a sentence to be backed up with a report. None of this means you should distrust your supplier. It means you should treat compliance evidence the way you treat any other part of the specification: in writing, per SKU, and checked before the deposit is paid.
Buyers sometimes ask whether REACH applies to small orders or to samples. The regulation does not have a small-order exemption for products placed on the EU market; the same rules apply whether you order 60 pieces or 60,000. Samples are a sensible place to start — IVANDA's minimum order is 60 pieces per style, and samples let you check the colour, finish, and weight before committing — but do not treat a small first order as a reason to skip the paperwork. The paperwork is what lets the second order happen.
Your Next Step: Build REACH into Your Order Checklist
Add three lines to the checklist you use for every EU order. One, a REACH compliance statement for the exact SKUs and finishes on the order. Two, a nickel release test report for the finished pieces in the finish you are ordering, tested to EN 1811, with the laboratory, method, samples, and result stated. Three, written confirmation that bulk production uses the same 316L material and the same 18K PVD coating process as the tested samples. File all three with the order, and send copies to your retail customers when they ask — the buyers who can produce documentation fastest are the buyers who get listed fastest.
If you are sourcing for the EU market, start with samples and documentation together. IVANDA has manufactured stainless steel jewelry since 2016 from a 3,500 square metre factory in Yiwu, with a monthly capacity of 300,000 pieces, supplying retailers and brands on a 60-piece-per-style minimum with custom production in 25–35 days. Ask for the REACH statement and the nickel release test report for the SKUs you are considering, review them against the checklist above, and order samples before you commit to bulk.
Get a Quote or Request Samples: send your designs or a shortlist from the catalogue to IVANDA through the OEM / ODM page or the contact page. Include the SKU, the PVD colour, the quantity per style, and the EU market you are selling into — and ask for the compliance documents with the quotation, not after it.
Frequently asked questions
Does REACH ban 316L stainless steel jewelry in the EU?
No. REACH restricts nickel release from articles in prolonged skin contact; it does not ban the steel grade. 316L jewelry is widely sold in the EU. What matters is the nickel release of the finished piece, demonstrated by a test report for your specific SKU and finish.
Is a material certificate enough to prove REACH compliance?
No. A certificate for the steel describes the raw material. REACH compliance applies to the finished article, including its PVD coating and assembly, so you need a test report on the finished piece in the finish you are ordering.
Do I need REACH documents for a small first order?
Yes. The rules apply to products placed on the EU market regardless of order size. Ask for the statement and the test report at the quotation stage, even for a first order at the 60-piece minimum.
What if my supplier cannot provide a nickel release test report?
Ask whether testing can be arranged for your SKU and what it would cost in time before bulk production. If no report can be provided, consider ordering samples first or choosing a design that already has test evidence. Do not place a bulk EU order without documentation you can show your own customers.


