Salt Spray Test: What Wholesale Buyers Should Ask | IVANDA

A salt spray test report shows whether 18K PVD gold stainless steel jewelry will hold its colour. Learn what to ask your supplier and what a valid report must show.

media-generation-2026-11-16-salt-spray-test-cov-0-2eb285a0-e7f1-4d60-a561-3cd635544d32

Short answer: A salt spray test report is the fastest way to check whether a supplier's 18K PVD gold stainless steel jewelry will keep its colour in real wear. Before you place a wholesale order, ask the supplier for the test report for the exact SKU you plan to buy, check which test method was used, what the tested samples were, how long the test ran, and what the result was. If a supplier cannot produce a report for your SKU, treat that as a gap to close before you order — not as a detail to check later. The test itself does not prove a piece will last forever, but a missing or vague report is one of the clearest early warnings a wholesale buyer can get.

Why the Salt Spray Test Matters Before You Order

Every wholesale jewelry buyer has heard the same promise: the gold colour will not fade. The problem is that the promise is easy to make and hard to verify from a catalogue photo. A salt spray test turns that promise into something you can read. In the test, finished pieces are placed in a chamber and exposed to a fine salt fog that accelerates the kind of corrosion sweat, humidity, and sea air cause over months of wear. The laboratory then records how the surface holds up over the test period.
For a buyer, the value is practical, not academic. Stainless steel jewelry is sold on durability: customers expect it to survive daily wear, showers, gym sessions, and holidays by the sea. The base metal matters — IVANDA works in 316L stainless steel, which contains chromium 16–18%, nickel 10–14%, molybdenum 2–3%, and carbon at a maximum of 0.03% — and that composition gives the steel strong corrosion resistance on its own. But the gold colour a customer sees is the PVD coating, and the coating is the layer that has to survive. A salt spray test checks the finished piece, coating included, so it tests the product your customer will actually wear rather than the raw material alone.
This is also where wholesale risk concentrates. A colour problem rarely shows up in the first week. It shows up in month three, when a retailer has already sold through a batch and the returns start. By then the cost is not just the refunded pieces; it is the retailer relationship, the reviews, and the reorder that never comes. A test report requested before the order costs a buyer nothing but a question, and it is the cheapest insurance in the whole buying process. That is the hook of this article: the salt spray test is not a laboratory curiosity, it is a buying control, and buyers who use it well avoid the most expensive kind of surprise.

What a Salt Spray Test Actually Measures

A salt spray test measures corrosion resistance under accelerated conditions. Finished samples are exposed to a salt fog inside a controlled chamber, and the laboratory inspects them at intervals for visible change: discolouration, spotting, rust-coloured marks, blistering, or peeling of the coating. The report states the test method used, the duration, and the result observed at the end of the test.
Three points matter for how you interpret that result. First, the test is accelerated, which means it is a comparison tool, not a calendar. A piece that passes a test has demonstrated resistance under the test conditions; it has not been proven to last a specific number of years on a customer's wrist. Do not let a supplier translate a test result into a lifetime guarantee. Second, the result belongs to the samples that were actually tested — the specific design, the specific PVD colour, and the specific production batch. A report for a gold necklace does not automatically cover a rose-gold ring from a different run. Third, the test checks the surface, not the whole product. A clasp that breaks, a stone that falls out, or a chain that kinks are quality issues a salt spray test will never catch, which is why it sits alongside other checks rather than replacing them. For the rest of the quality picture, see the stainless steel jewelry quality control guide.
The method most commonly referenced is ASTM B117 or an equivalent salt spray method. Ask which method the report used and confirm the report states it. If the method is not named, the report is hard to compare with anything else, and that alone is a reason to ask for a clearer document.

How to Read a Salt Spray Test Report

A useful report answers five questions. If any of them is missing, ask the supplier to fill the gap before you commit to an order.

What a valid report should contain

A report worth relying on names the laboratory that ran the test, the test method, and the date. It describes the samples — design, material, coating colour, and quantity — so you can confirm the tested pieces match the SKU you are buying. It states the test duration in hours and the inspection intervals. And it states the result in plain terms: what was observed on the surface at the end of the test, and whether the samples passed the criteria the laboratory applied. A report that only says "passed" without a duration, a method, or a sample description is a claim, not evidence.

Questions to ask before you accept a report

Start with the simplest one: is this report for the exact SKU and PVD colour I am ordering? Then ask when the report was issued and whether it covers the current production run, because a report from an older batch does not describe the batch you will receive. Ask what the test duration was, and confirm it in writing rather than accepting a verbal summary. Ask whether the samples were finished pieces or unfinished blanks, because a test on an uncoated blank tells you nothing about the coating. Finally, ask whether the supplier can provide a fresh report for a new batch if you reorder in a different colour. A supplier that answers these questions directly is a supplier that has its testing under control; a supplier that deflects them is giving you information too, just not the kind you asked for.

What the numbers mean — and what they do not

Buyers often ask how many hours a salt spray test should run. There is no single number in this article because the right duration depends on the product, the coating, and the standard your market expects — confirm the applicable duration with the supplier for the specific SKU, and check it against the factory test report. What matters is that the duration is stated, the method is stated, and the result matches what the report claims. A longer test on the wrong samples is worth less than a shorter test on the right ones. Compare reports on the same basis: same method, same kind of sample, same way of reporting the result. If two suppliers give you reports you cannot compare because one omits the method and the other omits the duration, you do not have two offers — you have one offer and one unknown.

An IVANDA example: what a real report looks like

As an example of the five points above, IVANDA's salt spray test report ZGN260328320 (Heze Zhong Gainian Testing, 28 March 2026) used ASTM B117 with 5% NaCl for 48 hours. The result was PASS at Grade 4 — slight uniform change, on a scale where 5 is no change and 4 or better is acceptable. This result applies only to the samples tested in that report. Ask for the test report for the exact SKU and PVD colour you are ordering, and check the method, duration, samples, and result in the same way.

Red Flags: Reports and Claims to Question

Some warning signs are easy to spot once you know them. A report with no laboratory name, no date, or no sample description should not be accepted as evidence. A photocopied report where the design name or the test duration is unreadable is not a report you can rely on. A supplier that quotes a test result for one colour and applies it to every colour in the catalogue is overstating its evidence — different PVD colours can behave differently, so each colour needs its own evidence. Be equally careful with absolute claims in marketing language: no supplier can honestly promise that a piece will never change colour or never cause a reaction, because wear conditions vary and no test covers every real-world exposure. Honest suppliers describe resistance and results; they do not sell guarantees the test cannot support.
Another flag is timing. If a supplier sends the report only after you have paid the deposit, you have lost your leverage to act on it. Ask for the report at the quotation stage, while you can still walk away or switch designs. The same applies to the sample stage: when you order samples, ask that the sample pieces come from the same production conditions as the bulk order, and confirm in writing that the bulk production will use the same material and coating process as the tested samples. IVANDA's standard terms are a useful reference point here — 316L stainless steel, 18K PVD gold, a minimum order of 60 pieces per style, and a custom production lead time of 25–35 days — but the terms only protect you if the product that ships matches the product that was tested.
There is also a commercial risk worth naming. Some buyers treat a test report as a reason to skip samples altogether. That is a mistake. A report describes laboratory conditions; samples show you the actual colour, weight, clasp, and finish of the piece you will sell. The report and the sample answer different questions, and a careful buyer wants both. The 316L vs 304 comparison explains why the base grade matters, and the PVD manufacturing guide explains how the coating is applied — both help you ask sharper questions when a report lands in your inbox.

Your Next Step: From Report to Sample Order

Turn this article into a short routine you can use on your next order. First, add the salt spray test report to your supplier checklist, next to the material grade and the coating specification. Second, request the report at the quotation stage and file it with the SKU it belongs to, so the document and the product never get separated. Third, compare the report with the samples when they arrive: does the colour on the sample match the colour described in the report, and does the finish feel consistent across the pieces? Fourth, keep the report for your own records and for your retail customers — retailers increasingly ask their suppliers for test evidence, and a buyer who can produce it wins orders from buyers who cannot.
If you are sourcing 316L stainless steel jewelry with an 18K PVD gold finish, start with a sample order. IVANDA has manufactured stainless steel jewelry since 2016 from a 3,500 square metre factory in Yiwu, with a monthly capacity of 300,000 pieces, and supplies retailers and brands on a 60-piece-per-style minimum with custom production in 25–35 days. Ask for the salt spray test report for the SKU you are considering, review it against the checklist above, and order samples before you commit to bulk.
Get a Quote or Request Samples: send your designs or a shortlist from the catalogue to IVANDA through the OEM / ODM page or the contact page. Include the SKU, the PVD colour, the quantity per style, and the test report you would like to see — the clearer the request, the faster the quotation.

Frequently asked questions

Does a salt spray test guarantee my jewelry will not fade?

No. It shows how the tested samples behaved under controlled, accelerated conditions. It is strong evidence about corrosion resistance, but it is not a guarantee of how a piece will look after years of individual wear. Ask for the report for your specific SKU and treat it as one check among several.

Can I use one report for all colours and designs?

No. A report covers the samples that were tested. Different PVD colours and different designs need their own evidence. If a supplier offers one report for an entire catalogue, ask for the reports that match the SKUs you are actually ordering.

When should I ask for the report?

At the quotation stage, before you pay a deposit. That is when the report can still change your decision. Asking after payment turns a buying control into a formality.

What if the supplier has no report for my SKU?

Ask whether a test can be arranged and what it would cost in time before bulk production. If no report can be provided at all, weigh that gap against the size of the order and consider ordering samples first, or choosing a design that already has test evidence.

Read next

More from the journal

Keep readers moving through related announcements, stories, and field notes.